.vscode/tasks.json

@@ -1,37 +0,0 @@
-{
-    "tasks": [
-        {
-            "label": "CMake & Make",
-            "type": "shell",
-            "group": "build",
-
-            "command": "mkdir -p build && cd build && cmake ../ && make",
-
-            "presentation": {
-                "echo": true,
-                "reveal": "always",
-                "focus": true,
-                "panel": "shared",
-                "showReuseMessage": true,
-                "clear": true
-            }
-        },
-        {
-            "label": "CMake & Make & Flash",
-            "type": "shell",
-            "group": "build",
-
-            "command": "mkdir -p build && cd build && cmake ../ && make Flash",
-
-            "presentation": {
-                "echo": true,
-                "reveal": "always",
-                "focus": true,
-                "panel": "shared",
-                "showReuseMessage": true,
-                "clear": true
-            }
-        }
-    ],
-    "version": "2.0.0"
-}

CMakeLists.txt

@@ -1,29 +1,36 @@
 cmake_minimum_required(VERSION 3.13)
 
-# Définir explicitement la carte comme Pico W
-set(PICO_BOARD pico_w)
-if(NOT DEFINED PICO_BOARD)
-    add_definitions(-DPICO_BOARD=${PICO_BOARD})
-endif()
-
 include(pico_sdk_import.cmake)
 
 project(PicoWCommLib C CXX ASM)
 set(CMAKE_C_STANDARD 11)
 set(CMAKE_CXX_STANDARD 17)
 
+# Définir explicitement la carte comme Pico W
+set(PICO_BOARD pico_w)
+if(NOT DEFINED PICO_BOARD)
+    add_definitions(-DPICO_BOARD=${PICO_BOARD})
+endif()
+
 pico_sdk_init()
 
 add_executable(PicoWCommLib
-  src/main.c
+  src/test_connection.c
+  src/wifi_operator/wifi_operator.c
+  src/udp/udp_client.c
+  src/udp/udp_server.c
 )
 
 target_include_directories(PicoWCommLib PRIVATE
     ${CMAKE_CURRENT_LIST_DIR}/src
-)
+    ${CMAKE_CURRENT_LIST_DIR}/src/SerialOutput
+    ${CMAKE_CURRENT_LIST_DIR}/src/WifiOperator
+    ${CMAKE_CURRENT_LIST_DIR}/src/udp)
 
 target_link_libraries(PicoWCommLib
   pico_stdlib
+  pico_multicore
+  hardware_uart
   pico_cyw43_arch_lwip_poll
 )
 

compilAndFlash.sh

@@ -0,0 +1,33 @@
+#!/bin/bash
+
+# Build the project
+if [ "$1" = "-D" ] || [ "$1" = "--delete" ]; then
+    rm -rf build/*
+    echo "Build directory cleaned"
+fi
+
+# Create build directory if it doesn't exist
+if [ ! -d "build" ]; then
+    mkdir build
+fi
+
+# Enter build directory
+cd build || exit 1
+
+# Only run CMake if CMakeCache.txt doesn't exist or if it's older than CMakeLists.txt
+if [ ! -f "CMakeCache.txt" ] || [ "../CMakeLists.txt" -nt "CMakeCache.txt" ]; then
+    cmake -DPICO_BOARD=pico_w ..
+    if [ $? -ne 0 ]; then
+        echo "CMake configuration failed"
+        exit 1
+    fi
+fi
+
+# Build the project
+if ! make -j; then
+    echo "Build failed"
+    exit 1
+fi
+
+# Flash the device
+sudo make Flash

pico_sdk_import.cmake

@@ -3,28 +3,6 @@
 # This can be dropped into an external project to help locate this SDK
 # It should be include()ed prior to project()
 
-# Copyright 2020 (c) 2020 Raspberry Pi (Trading) Ltd.
-#
-# Redistribution and use in source and binary forms, with or without modification, are permitted provided that the
-# following conditions are met:
-#
-# 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following
-# disclaimer.
-#
-# 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
-# disclaimer in the documentation and/or other materials provided with the distribution.
-#
-# 3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products
-# derived from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
 if (DEFINED ENV{PICO_SDK_PATH} AND (NOT PICO_SDK_PATH))
     set(PICO_SDK_PATH $ENV{PICO_SDK_PATH})
     message("Using PICO_SDK_PATH from environment ('${PICO_SDK_PATH}')")
@@ -40,20 +18,9 @@ if (DEFINED ENV{PICO_SDK_FETCH_FROM_GIT_PATH} AND (NOT PICO_SDK_FETCH_FROM_GIT_P
     message("Using PICO_SDK_FETCH_FROM_GIT_PATH from environment ('${PICO_SDK_FETCH_FROM_GIT_PATH}')")
 endif ()
 
-if (DEFINED ENV{PICO_SDK_FETCH_FROM_GIT_TAG} AND (NOT PICO_SDK_FETCH_FROM_GIT_TAG))
-    set(PICO_SDK_FETCH_FROM_GIT_TAG $ENV{PICO_SDK_FETCH_FROM_GIT_TAG})
-    message("Using PICO_SDK_FETCH_FROM_GIT_TAG from environment ('${PICO_SDK_FETCH_FROM_GIT_TAG}')")
-endif ()
-
-if (PICO_SDK_FETCH_FROM_GIT AND NOT PICO_SDK_FETCH_FROM_GIT_TAG)
-  set(PICO_SDK_FETCH_FROM_GIT_TAG "master")
-  message("Using master as default value for PICO_SDK_FETCH_FROM_GIT_TAG")
-endif()
-
 set(PICO_SDK_PATH "${PICO_SDK_PATH}" CACHE PATH "Path to the Raspberry Pi Pico SDK")
 set(PICO_SDK_FETCH_FROM_GIT "${PICO_SDK_FETCH_FROM_GIT}" CACHE BOOL "Set to ON to fetch copy of SDK from git if not otherwise locatable")
 set(PICO_SDK_FETCH_FROM_GIT_PATH "${PICO_SDK_FETCH_FROM_GIT_PATH}" CACHE FILEPATH "location to download SDK")
-set(PICO_SDK_FETCH_FROM_GIT_TAG "${PICO_SDK_FETCH_FROM_GIT_TAG}" CACHE FILEPATH "release tag for SDK")
 
 if (NOT PICO_SDK_PATH)
     if (PICO_SDK_FETCH_FROM_GIT)
@@ -65,37 +32,11 @@ if (NOT PICO_SDK_PATH)
         FetchContent_Declare(
                 pico_sdk
                 GIT_REPOSITORY https://github.com/raspberrypi/pico-sdk
-                GIT_TAG ${PICO_SDK_FETCH_FROM_GIT_TAG}
+                GIT_TAG master
         )
-
         if (NOT pico_sdk)
             message("Downloading Raspberry Pi Pico SDK")
-            # GIT_SUBMODULES_RECURSE was added in 3.17
+            FetchContent_Populate(pico_sdk)
-            if (${CMAKE_VERSION} VERSION_GREATER_EQUAL "3.17.0")
-                FetchContent_Populate(
-                        pico_sdk
-                        QUIET
-                        GIT_REPOSITORY https://github.com/raspberrypi/pico-sdk
-                        GIT_TAG ${PICO_SDK_FETCH_FROM_GIT_TAG}
-                        GIT_SUBMODULES_RECURSE FALSE
-
-                        SOURCE_DIR ${FETCHCONTENT_BASE_DIR}/pico_sdk-src
-                        BINARY_DIR ${FETCHCONTENT_BASE_DIR}/pico_sdk-build
-                        SUBBUILD_DIR ${FETCHCONTENT_BASE_DIR}/pico_sdk-subbuild
-                )
-            else ()
-                FetchContent_Populate(
-                        pico_sdk
-                        QUIET
-                        GIT_REPOSITORY https://github.com/raspberrypi/pico-sdk
-                        GIT_TAG ${PICO_SDK_FETCH_FROM_GIT_TAG}
-
-                        SOURCE_DIR ${FETCHCONTENT_BASE_DIR}/pico_sdk-src
-                        BINARY_DIR ${FETCHCONTENT_BASE_DIR}/pico_sdk-build
-                        SUBBUILD_DIR ${FETCHCONTENT_BASE_DIR}/pico_sdk-subbuild
-                )
-            endif ()
-
             set(PICO_SDK_PATH ${pico_sdk_SOURCE_DIR})
         endif ()
         set(FETCHCONTENT_BASE_DIR ${FETCHCONTENT_BASE_DIR_SAVE})

python_test_codes/test_udp_receiver.py

@@ -0,0 +1,18 @@
+#!/usr/bin/env python3
+
+import socket
+import struct
+
+def start_udp_server():
+    sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
+    sock.bind(('0.0.0.0', 10101))
+    print("Serveur UDP démarré sur le port 10101")
+
+    while True:
+        data, addr = sock.recvfrom(1024)
+        if len(data) == 2:
+            packet_num, instruction = struct.unpack('BB', data)
+            print(f"Reçu: packet_number={packet_num}, instruction={instruction}")
+
+if __name__ == '__main__':
+    start_udp_server()

python_test_codes/test_udp_send.py

@@ -4,18 +4,22 @@ import socket
 import time
 import struct
 
-sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
+def send_test_packets():
-pico_address = ('255.255.255.255', 4243)
+    sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
-
+    pico_address = ('192.168.128.1', 4243)  # Adresse IP du Pico W
-packet_number = 0
+    
-instruction = 0
+    packet_number = 0
-
+    instruction = 0
-while True:
+    
-    # Créer le message binaire
+    while True:
-    message = struct.pack('BB', packet_number, instruction)
+        # Créer le message binaire
-    sock.sendto(message, pico_address)
+        message = struct.pack('BB', packet_number, instruction)
-
+        sock.sendto(message, pico_address)
-    packet_number = (packet_number + 1) % 256
+        
-    instruction = (instruction + 1) % 256
+        packet_number = (packet_number + 1) % 256
-    print("Sended")
+        instruction = (instruction + 1) % 256
-    time.sleep(3.5)
+        
+        time.sleep(3.5)
+        
+if __name__ == '__main__':
+    send_test_packets()

src/lwipopts.h

@@ -21,18 +21,18 @@
 #endif
 #define MEM_ALIGNMENT               4
 #ifndef MEM_SIZE
-#define MEM_SIZE                    4000
+#define MEM_SIZE                    32768          // Augmenté pour plus de mémoire disponible
 #endif
 #define MEMP_NUM_TCP_SEG            32
 #define MEMP_NUM_ARP_QUEUE          10
-#define PBUF_POOL_SIZE              24
+#define PBUF_POOL_SIZE              32              // Augmenté pour réduire les allocations
 #define LWIP_ARP                    1
 #define LWIP_ETHERNET               1
 #define LWIP_ICMP                   1
 #define LWIP_RAW                    1
-#define TCP_WND                     (8 * TCP_MSS)
+#define TCP_WND                     (16 * TCP_MSS)  // Augmenté pour de meilleures performances
 #define TCP_MSS                     1460
-#define TCP_SND_BUF                 (8 * TCP_MSS)
+#define TCP_SND_BUF                 (8 * TCP_MSS)   // Augmenté pour de meilleures performances
 #define TCP_SND_QUEUELEN            ((4 * (TCP_SND_BUF) + (TCP_MSS - 1)) / (TCP_MSS))
 #define LWIP_NETIF_STATUS_CALLBACK  1
 #define LWIP_NETIF_LINK_CALLBACK    1
@@ -45,6 +45,7 @@
 // #define ETH_PAD_SIZE                2
 #define LWIP_CHKSUM_ALGORITHM       3
 #define LWIP_DHCP                   1
+#define LWIP_DHCP_SERVER            1
 #define LWIP_IPV4                   1
 #define LWIP_TCP                    1
 #define LWIP_UDP                    1
@@ -89,4 +90,8 @@
 #define SLIP_DEBUG                  LWIP_DBG_OFF
 #define DHCP_DEBUG                  LWIP_DBG_OFF
 
-#endif /* __LWIPOPTS_H__ */
+#define SYS_LIGHTWEIGHT_PROT       1  // Protection pour le multicore
+#define MEMP_NUM_PBUF              32  // Augmenté pour les buffers
+#define ICMP_TTL                   255 // Augmenté pour la fiabilité
+
+#endif /* __LWIPOPTS_H__ */

src/main.c

@@ -1,122 +0,0 @@
-// Necessary includes from the Pico SDK
-#include <pico/stdio.h>
-#include <stdio.h>
-#include <pico/cyw43_arch.h>
-#include <lwip/udp.h>
-#include <time.h>
-
-#define SSID "thinkpad-T440p"
-#define PASSWORD "CDuKaka2000!"
-
-#define PORT 4243
-
-static void udp_recv_callback(void *arg, struct udp_pcb *pcb, struct pbuf *p, const ip_addr_t *addr, u16_t port)
-{
-    puts("Callback");
-
-    if(p->len == 1)
-    {
-        printf("a:%d\n", ((uint8_t *)p->payload)[0]);
-    }
-    pbuf_free(p);
-}
-
-int main()
-{
-    stdio_init_all();
-
-    sleep_ms(2000);
-
-    puts("Pi Starting...");
-
-    if(cyw43_arch_init_with_country(CYW43_COUNTRY_FRANCE))
-    {
-        puts("CYW43 arch init failed");
-        return -1;
-    }
-
-    cyw43_arch_enable_sta_mode();
-    cyw43_wifi_pm(&cyw43_state, CYW43_NO_POWERSAVE_MODE);
-
-    puts("CYW43 arch initialized");
-
-    for(int error_code = 1; error_code; )
-    {
-        puts("WiFi connection attempt");
-
-        error_code = cyw43_arch_wifi_connect_timeout_ms(SSID, PASSWORD, CYW43_AUTH_WPA2_AES_PSK, 10000);
-
-        if(error_code)
-        {
-            const char *error_message;
-
-            switch(error_code)
-            {
-              case PICO_ERROR_TIMEOUT:
-                error_message = "Timeout reached";
-                break;
-
-              case PICO_ERROR_BADAUTH:
-                error_message = "Bad password";
-                break;
-
-              case PICO_ERROR_CONNECT_FAILED:
-                error_message = "Some reason";
-                break;
-            }
-
-            printf("Connection failed : %s\n", error_message);
-        }
-    }
-
-    puts("WiFi connected");
-
-    struct udp_pcb *pcb = udp_new();
-
-    if(!pcb)
-    {
-        puts("UDP pcb init failed");
-        return -1;
-    }
-
-    udp_recv(pcb, udp_recv_callback, NULL);
-
-    udp_bind(pcb, IP4_ADDR_ANY, PORT);
-
-    // ========================== Main loop ==========================
-    while(true)
-    {
-        cyw43_arch_poll();
-
-        int ret = cyw43_wifi_link_status(&cyw43_state, CYW43_ITF_STA);
-        if(ret != CYW43_LINK_JOIN)
-        {
-            const char *status_message;
-            switch(ret)
-            {
-              case CYW43_LINK_DOWN:
-                status_message = "WiFi down";
-                break;
-
-              case CYW43_LINK_JOIN:
-                status_message = "WiFi up";
-                break;
-
-              case CYW43_LINK_FAIL:
-                status_message = "WiFi connection failed";
-                break;
-
-              case CYW43_LINK_NONET:
-                status_message = "Network not found";
-                break;
-
-              case CYW43_LINK_BADAUTH:
-                status_message = "Bad auth";
-                break;
-            }
-            puts(status_message);
-        }
-
-        tight_loop_contents();
-    }
-}

src/test_connection.c

@@ -0,0 +1,120 @@
+// Necessary includes from the Pico SDK
+#include <pico/stdio.h>
+#include <stdio.h>
+#include "pico/cyw43_arch.h"
+
+// Custom libraries includes
+#include "wifi_operator/wifi_operator.h"
+#include "udp/udp_client.h"
+#include "udp/udp_server.h"
+
+// Multicore includes to limit latency on packet reception on core 0
+#include "pico/multicore.h"
+#include "hardware/irq.h"
+#include "hardware/sync.h"
+#include "pico/mutex.h"
+
+#define UART_ID uart0
+#define BAUD_RATE 115200
+#define UART_TX_PIN 0 // GP0
+#define UART_RX_PIN 1 // GP1
+#define UDP_SERVER_PORT 4242
+#define UDP_CLIENT_PORT 4243
+
+// Ajouter ces defines en haut du fichier
+#define TARGET_IP "192.168.128.2"  // IP de votre PC
+#define TARGET_PORT 10101          // Port sur lequel votre PC écoute
+
+// Access Point configuration
+#define AP_SSID "PicoW_AP"
+#define AP_PASSWORD "password123"
+#define AP_CHANNEL 13
+
+// Déclarer le mutex comme variable globale
+auto_init_mutex(wifi_mutex);
+
+// En haut du fichier, après les includes existants
+#define BUFFER_SIZE 1024
+
+void custom_message_callback(uint8_t packet_number, uint8_t instruction, const ip_addr_t *addr, u16_t port)
+{
+    printf("Core0: Received: packet=%d, instruction=%d, from %s:%d\n", packet_number, instruction, ipaddr_ntoa(addr), port);
+
+    //making the led blink twice in 0.1s
+    for (int i = 0; i < 2; i++)
+    {
+        cyw43_arch_gpio_put(CYW43_WL_GPIO_LED_PIN, true);
+        sleep_ms(25);
+        cyw43_arch_gpio_put(CYW43_WL_GPIO_LED_PIN, false);
+        sleep_ms(25);
+    }
+}
+
+void core1_entry()
+{
+    int diodeState = 0;
+    udp_server_init(UDP_SERVER_PORT);  // Uniquement le serveur sur core 1
+
+    uint8_t buffer[2];
+    uint8_t *packet_number = &buffer[0];
+    uint8_t *instruction = &buffer[1];
+
+    printf("Core1: Starting UDP server on port %d\n", UDP_SERVER_PORT);
+
+    while(true)
+    {
+        mutex_enter_blocking(&wifi_mutex);
+        cyw43_arch_gpio_put(CYW43_WL_GPIO_LED_PIN, diodeState); // Update LED
+        udp_server_send(buffer, sizeof(buffer), TARGET_IP, TARGET_PORT); // Send message
+        mutex_exit(&wifi_mutex);
+
+        // Increment counters
+        *packet_number = (*packet_number + 1) % 256;
+        *instruction = (*instruction + 1) % 256;
+
+        diodeState = !diodeState;
+
+        sleep_ms(2000);
+    }
+}
+
+int main()
+{
+    stdio_init_all();
+
+    sleep_ms(2000);
+
+    puts("Pi Starting...");
+
+    if(cyw43_arch_init())
+    {
+        puts("WiFi init failed !");
+        return -1;
+    }
+
+    multicore_launch_core1(core1_entry);
+
+    puts("WiFi is configuring...");
+
+    mutex_enter_blocking(&wifi_mutex);
+    wifi_operator_init_ap_mode(AP_SSID, AP_PASSWORD, AP_CHANNEL);
+    mutex_exit(&wifi_mutex);
+
+    puts("WiFi configured !");
+
+    // Starts UDP client on core 0
+    udp_client_init(UDP_CLIENT_PORT, custom_message_callback);
+    // UDP client receive data on port 4243 automatically and execute the message callback on each receptions
+    puts("UDP client started on core 0 !");
+
+    while(true)
+    {
+        mutex_enter_blocking(&wifi_mutex);
+        cyw43_arch_poll();
+        mutex_exit(&wifi_mutex);
+
+        tight_loop_contents();
+    }
+
+    udp_client_exit(); // Hehehe, I know you could forgot this one
+}

src/udp/udp_client.c

@@ -0,0 +1,62 @@
+#include "udp_client.h"
+
+#include <stdio.h>
+
+udp_client_t udp_client;
+
+static inline void handle_receive(struct pbuf *p, const ip_addr_t *addr, u16_t port)
+{
+    if(p->len >= 2)
+    {
+        uint8_t packet_number = ((uint8_t*)p->payload)[0];
+        uint8_t instruction = ((uint8_t*)p->payload)[1];
+
+        udp_client.message_callback(packet_number, instruction, addr, port);
+    }
+
+    pbuf_free(p);
+}
+
+static void udp_receive_callback(void *arg, struct udp_pcb *pcb, struct pbuf *p, const ip_addr_t *addr, u16_t port)
+{
+    udp_client_t *udp_client_received_data = (udp_client_t *)arg;
+    handle_receive(p, addr, port);
+}
+
+// Default callback func
+static void default_message_callback(uint8_t packet_number, uint8_t instruction, const ip_addr_t *addr, u16_t port)
+{
+    printf("Reçu: packet=%d, instruction=%d depuis %s:%d\n", packet_number, instruction, ipaddr_ntoa(addr), port);
+}
+
+void udp_client_init(int port, message_callback_t callback)
+{
+    udp_client.message_callback = callback ? callback : default_message_callback;
+
+    udp_client.pcb = udp_new();
+    if(udp_client.pcb == NULL)
+    {
+        puts("Error creating UDP client");
+        return;
+    }
+
+    udp_recv(udp_client.pcb, udp_receive_callback, &udp_client);
+
+    err_t err = udp_bind(udp_client.pcb, IP_ADDR_ANY, port);
+    if(err != ERR_OK)
+    {
+        printf("Erreur bind UDP client: %d\n", err);
+        return;
+    }
+
+    printf("UDP client started on port %d\n", port);
+}
+
+void udp_client_exit(void)
+{
+    if(udp_client.pcb)
+    {
+        udp_remove(udp_client.pcb);
+        udp_client.pcb = NULL;
+    }
+}

src/udp/udp_client.h

@@ -0,0 +1,26 @@
+#ifndef UDP_CLIENT_H
+#define UDP_CLIENT_H
+
+#include <stdint.h>
+#include "lwip/udp.h"
+
+#define BUFFER_SIZE 1024
+
+// Message callback deffinition
+typedef void (*message_callback_t)(uint8_t packet_number, uint8_t instruction, const ip_addr_t *addr, uint16_t port);
+
+// Data in here is used by the hardware
+typedef struct udp_client_t {
+    struct udp_pcb *pcb;                // Like this
+    ip_addr_t local_addr;               // Or this
+    uint16_t local_port;                // So don't remove them, even if they are not used explicitely in the program
+    uint8_t recv_buffer[BUFFER_SIZE];   // Please (Not even change their position)
+    message_callback_t message_callback;
+} udp_client_t;
+
+// Init udp client, set callback to NULL for the default callback
+void udp_client_init(int port, message_callback_t callback);
+// Exit udp client
+void udp_client_exit(void);
+
+#endif // UDP_CLIENT_H

src/udp/udp_server.c

@@ -0,0 +1,87 @@
+#include "udp_server.h"
+
+#include <stdio.h>
+#include "pico/cyw43_arch.h"
+#include "lwip/def.h"
+
+udp_server_t udp_server;
+
+void udp_server_init(int port)
+{
+    udp_server.pcb = udp_new();
+    if(!udp_server.pcb)
+    {
+        puts("Error creating UDP server");
+        return;
+    }
+
+    err_t err = udp_bind(udp_server.pcb, IP_ADDR_ANY, port);
+    if(err != ERR_OK)
+    {
+        printf("Error binding UDP server: %d\n", err);
+        return;
+    }
+}
+
+void udp_server_exit(void)
+{
+    if(udp_server.pcb)
+    {
+        udp_remove(udp_server.pcb);
+        udp_server.pcb = NULL;
+    }
+}
+
+void udp_server_send(const uint8_t *data, size_t length, const char *ip, uint16_t port)
+{
+    ip4addr_aton(ip, &udp_server.remote_addr);
+    udp_server.remote_port = port;
+
+    // Nombre maximum de tentatives
+    const int MAX_RETRIES = 3;
+    uint tries = 0;
+
+    while(tries < MAX_RETRIES)
+    {
+        struct pbuf *p = pbuf_alloc(PBUF_TRANSPORT, length, PBUF_RAM);
+        if(p == NULL)
+        {
+            printf("Try %d - Error allocating pbuf\n", ++tries);
+            sleep_ms(100);  // Wait before retry
+            continue;
+        }
+
+        memcpy(p->payload, (char *)data, length);
+        err_t err = udp_sendto(udp_server.pcb, p, &udp_server.remote_addr, udp_server.remote_port);
+        pbuf_free(p);
+
+        if (err == ERR_OK)
+        {
+            return;  // Succès
+        }
+        else
+        {
+            const char* error_msg;
+
+            switch(err)
+            {
+              case ERR_MEM:
+                error_msg = "Insuficient memory";
+                break;
+
+              case ERR_BUF:
+                error_msg = "Buffer full";
+                break;
+
+              default:
+                error_msg = "Unknown error";
+            }
+
+            printf("Try %d - Error send UDP: %d (%s)\n", ++tries, err, error_msg);
+
+            sleep_ms(100);  // Wait before retry
+        }
+    }
+
+    printf("Error sending data after %d tries...\n", tries);
+}

src/udp/udp_server.h

@@ -0,0 +1,17 @@
+#ifndef UDP_SERVER_H
+#define UDP_SERVER_H
+
+#include <stdint.h>
+#include "lwip/udp.h"
+
+typedef struct udp_server_t {
+    struct udp_pcb *pcb;
+    ip_addr_t remote_addr;
+    uint16_t remote_port;
+} udp_server_t;
+
+void udp_server_init(int port);
+void udp_server_exit(void);
+void udp_server_send(const uint8_t *data, size_t length, const char *ip, uint16_t port);
+
+#endif // UDP_SERVER_H

src/wifi_operator/wifi_operator.c

@@ -0,0 +1,69 @@
+#include "wifi_operator.h"
+
+#include <stdio.h>
+#include "pico/cyw43_arch.h"
+#include "lwip/netif.h"
+#include "lwip/ip4_addr.h"
+
+void wifi_operator_init_ap_mode(const char *ssid, const char *password, int channel)
+{
+    cyw43_arch_gpio_put(CYW43_WL_GPIO_LED_PIN, 1);
+
+    // Configuration IP pour le mode AP
+    ip4_addr_t ip, netmask, gateway;
+    IP4_ADDR(&ip, 192, 168, 128, 1);
+    IP4_ADDR(&netmask, 255, 255, 255, 0);
+    IP4_ADDR(&gateway, 192, 168, 128, 1);
+
+    puts("WiFi is configuring...");
+
+    // Désactiver le mode d'économie d'énergie
+    cyw43_wifi_pm(&cyw43_state, CYW43_NO_POWERSAVE_MODE);
+
+    // Activer le mode AP
+    cyw43_arch_enable_ap_mode(ssid, password, CYW43_AUTH_WPA2_AES_PSK);
+
+    // Attendre que l'interface soit prête
+    int retry = 0;
+    while (netif_default == NULL && retry < 10)
+    {
+        sleep_ms(500);
+        retry++;
+    }
+
+    if (netif_default == NULL)
+    {
+        puts("Error: wireless interface not initialised");
+        return;
+    }
+
+    // Configuration du canal WiFi
+    cyw43_wifi_ap_set_channel(&cyw43_state, channel);
+
+    // Configuration de l'interface réseau
+    netif_set_up(netif_default);
+    netif_set_link_up(netif_default);
+    netif_set_addr(netif_default, &ip, &netmask, &gateway);
+
+    puts("IP configuration ended !");
+    puts("Access point activated !");
+    printf("SSID : %s\n", ssid);
+    printf("Password : %s\n", password);
+    printf("Channel : %d\n", channel);
+}
+
+void wifi_operator_init(const char *ssid, const char *password)
+{
+    // Mode client
+    cyw43_arch_enable_sta_mode();
+    cyw43_arch_wifi_connect_timeout_ms(ssid, password, CYW43_AUTH_WPA2_AES_PSK, 30000);
+    puts("Connexion au réseau Wi-Fi...");
+    int status = cyw43_wifi_link_status(&cyw43_state, CYW43_ITF_STA);
+    while (status != CYW43_LINK_UP)
+    {
+        sleep_ms(500);
+        puts("Connexion en cours...");
+        status = cyw43_wifi_link_status(&cyw43_state, CYW43_ITF_STA);
+    }
+    puts("Connexion établie!");
+}

src/wifi_operator/wifi_operator.h

@@ -0,0 +1,8 @@
+#ifndef WIFI_OPERATOR_H
+#define WIFI_OPERATOR_H
+
+void wifi_operator_init_ap_mode(const char *ssid, const char *password, int channel);
+
+void wifi_operator_init(const char *ssid, const char *password);
+
+#endif // WIFI_OPERATOR_H